#RaspberryPi – How To automatically connect to WiFi, enable SSH on 1st boot, SSH connect and update!

Buy Me A Coffee


If you been playing around with Raspberry Pi, I’m sure you already know this. For me this was a 1st timer, so I must write this down for the future myself.

When I started testing the Raspberry Pi 4, I got one of the complete kits, so I got the official red keyboard and mouse.

raspberry pi 4 official keyboard and mouse

I figure out I also need a couple of extra video cables. Now we need a [Micro HDMI to HDMI Cable] to connect one of the 2 video outputs to an external monitor.

This is the (cheap) monitor I’ve been using for a long time, however by default the RPi does works in a valid resolution for this monitor.

raspberry pi 7 inches monitor

And, the 2 main tasks you perform when you start your RPI are

  • Configure Wireless Connection
  • Enable SSH

Of course, you can do this directly in the SD with the Raspbian image (see references). And it’s also very easy to do.

You need to create a file named [wpa_supplicant.conf] in the root of the SD card with the following information:


 ssid=" Your WiFi SSID"
 psk="You amazing password"

The file content is very straight forward to understand. Main values to complete are [ssid] and [psk]

Important: This only works the first time you boot the Raspberry Pi with the SD card. The SO search for [wpa_supplicant.conf] and performs the connection. If you already booted the device, you need to create a bootable SD card again.

If you also want to enable SSH, you need to create a blank file named [ssh] to the main partition.

And that’s it, your Raspberry Pi will be connected to the Wifi and with SSH enabled. At this moment we can use a tool like AngryIp (see references) to detect the new device in the network

My new device IP is:, so now I can use any SSH client (like Putty, see references) to connect to the device. As usual the default credentials are

  • user: pi
  • password: raspberry

You can now start working with your Raspberry Pi !

Of course, at this moment you should change your default password and update everything with a command like this one

sudo -- sh -c 'apt-get update; apt-get upgrade -y; apt-get dist-upgrade -y; apt-get autoremove -y; apt-get autoclean -y'

Happy coding!

Greetings @ Toronto

El Bruno


My posts on Raspberry Pi ⚡🐲⚡

Dev posts for Raspberry Pi
Tools and Apps for Raspberry Pi
Setup the device
Azure IoT

One thought on “#RaspberryPi – How To automatically connect to WiFi, enable SSH on 1st boot, SSH connect and update!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.